125g Self Adhesive CaCl2 Desiccant Pouch Tyvek

Description

If you're looking for a cost-effective desiccant for food storage, look no further than our 125g Self Adhesive CaCl2 Desiccant Pouch Tyvek! It absorbs moisture from the air, reducing humidity in a controlled environment, thereby protecting merchandise from moisture damage. It has excellent water absorption performance in wet conditions, and is ideal for desiccants because it removes excess moisture to prevent moisture from appearing in the package. And it performs better than silicone, especially at higher relative humidity. Because in these cases, it will effectively inhibit the generation of mold, bad smell, drying capacity is as high as 98%, and it can be reused by heating, saving you a lot of use costs.

Features

The 125g Self Adhesive CaCl2 Desiccant Pouch Tyvek is made of a combination of high-purity calcium chloride and gelling agent, which can quickly convert moisture into semi-solid gel without causing reverse evaporation and leakage of liquid. Its outer packaging is made of high-quality sealing technology, which has the ultimate moisture-proof function and sealing, and has excellent weather resistance, which can effectively resist the influence of extreme cold or high temperature environment. The granules of the product are tightly wrapped with reinforced edges, so they won't break easily when used for food preservation, and won't contaminate food and your other goods. In addition, it is widely used in food, medicinal materials, bamboo and wood products, clothing and other industries due to its good water absorption performance.

How to judge the status of moisture absorption?

For Silica Gel, we could not judge the status neither by visualization nor by touching. (Sometimes it may turn to pink from blue after using). For Sorb-Plus Desiccant, it is very easy, since it will turn to be solid after using, and make sure replace it by a new one after you find this situation.

How to dispose after using?

Burning it by incinerator: Burning Sorb-Plus and its package will not make any harmful gas and its content will turn into powder after being heated over 600℃, thus brings no pollution even when it is buried into the soil.

Burying it into soil: could dismantle its package first and bury the content into the soil after using, it will not pollute anything. The package is not easily rotten, so need dismantling first.

How is absorption capacity of Sorb-Plus Desiccant below 0℃？because our products are usually delivered to some extremely cold districts like Russia. 

Sorb-Plus Desiccant could work normally from -30℃ to 90℃. It just performs a little bit slower when the moisture content in the air is much less at a very low temperature. Silica Gel could not make continuous absorption when it is below 0℃, because the absorbed moisture blocks up its micro pores when frozen. Therefore, it hardly works under such a condition.